Can spark plugs cause a lawnmower not start?
A dirty or fouled spark plug can cause your lawn mower to not start. It can also work itself loose, causing issues. If the spark plug appears to be seated correctly but the engine doesn't start, a new one may be in order. For a few dollars, this easy fix can get your small engine working again.
Also to know is, how do I know if my lawn mower spark plug is bad?
Here's How to Know if a Lawn Mower Spark Plug is Bad
- You can't get the engine to fire up at all.
- You have to tug extra hard for longer than usual on the rewind.
- Your lawn mower loses power while moving.
- The gas runs out quicker than it used to.
Then, what would cause no spark on a lawn mower? If you don't see a spark on the tester, there may be a problem with the ignition coil of the flywheel to which it's attached. The ignition coil doesn't frequently develop problems, but the connection between the flywheel and coil or between the starting pulley and flywheel can wear out, and the coil may not be turning.
Besides, what do you do when your lawn mower won't start?
Your Mower Won't Start:
- Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten.
- Dirty Air Filter: Clean or replace.
- Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn't work, you might need a new fuel filter.
Why is my carburetor not getting gas?
No fuel at your carburetor can be caused by many things. It could be a simple issue like a fuel filter plugged so tight that no fuel can pass through. Another logical cause could be the fuel pump. ... A hole in the fuel line on the tank side could also cause the fuel pump to suck air instead of fuel from the fuel tank.
