What size spark plug does a Troy Bilt weed eater take?
Champion Spark Plugs for Troy-Bilt Equipment
| Center Electrode | Fine Wire Plug |
|---|---|
| Hex Size | 5/8" (16mm) |
| Reach | 18mm (0.708") |
| Seat | Tapered seat |
| Thread Size | 14mm |
Then, what kind of spark plug do I need for a Homelite weed eater?
Homelite Ryobi RY08510 UT-20760 (2 Pack) 852 - RCJ6Y Spark Plug # 870174001-2PK.
People also ask, what kind of spark plug does a Husqvarna weed eater take? 129L
| 129L SKU: 967 19 27‑01 | ||
|---|---|---|
| Spark plug | NGK CMR6A | NGK CMR6A |
| Electrode gap | 0.02 in | 0.02 in |
| Clutch engagement speed (±120) | 4,200 rpm | 4,200 rpm |
| Maximum rpm output shaft | 7,200 rpm | 7,200 rpm |
Hereof, what kind of spark plug does my Craftsman weed eater use?
Measuring Up. Craftsman recommends Champion brand small engine spark plugs. These plugs have a shorter reach, or thread length, than automotive plugs.
What does a champion rc12yc spark plug fit?
RC12YC Spark Plugs
| Center Electrode | Copper Core |
|---|---|
| Thread Size | 14mm |
| Tip | Projected Tip |
| Type | Resistor |
| Fits | BRIGGS & STRATTON GAS ENGINES -- Intek, Vanguard single cylinder OHV KOHLER GAS ENGINES -- Command OHV, K series, 16.0/TH16, 18.0/TH18 |
How do you check a spark plug on a weed eater?
What is the spark plug gap on a Homelite weed eater?
0.025 inches
Who makes Homelite weed eaters?
Techtronic Industries
What is the spark plug gap on a Homelite leaf blower?
(0.63 mm).How often should you change the spark plug in a weed eater?
approximately every 100 hours
What spark plug do I need for a Husqvarna 128ld?
NGK (6703) BPMR7A SOLID Standard Spark Plug, Pack of 1.What is the gap on a RCJ6Y?
RCJ6Y Spark Plugs| Gap | 0.027" (0.7mm) |
|---|---|
| Reach | 9.5mm (3/8") |
| Seat | Gasket seat |
| Terminal | Removable Nut |
| Thread Size | 14mm |
